Gas Pool Heater Repairs Perth

Author: Swimming Pool Repairs Perth Date: 03 July 2018

Warm Springs Pool and Spa Repairs

0409 874 343

Gas pool heater repairs, what is involved?

When to seek a repair

The are a number of telling signs that indicate when an individual requires a repair of some sort for their pool heater. the swimming pool heater is one of the most complex devices installed in your swimming pool. For this reason, it should be handled by a professional that specializes in that area.A gas pool heater operates by means of natural gas or liquid propane in some situations. However, gas can be relatively dangerous in some situations if it is not handled in the proper fashion. As you will note, the repair process will require a unique troubleshooting aspect, which will be used to assess both the source and the cause of the heater issue.

The repair process

The troubleshooting phase will require that a professional consider a vast range of possibilities. There are a host of different reasons why your pool heater has ceased to function properly. Furthermore, the repair process that you technical chooses to take will hinge on the problem at hand. Therefore, if, for instance, your heater will not ignite, the following questions should be considered:

Is the heater switch actually turned on? Does the temperature of the thermostat currently exceed that of the water temperature? Is the uomp filter completely clean? Is the valve for the heater turned on? Is the pilot lit? Are the plumbing and gas supply valves open? Answering these questions will play a fundamental role in helping resolve ignition issues.

If the pilot does not light at all, then the technician will consider the possibility of low gas pressure, or even an insufficient supply of air available to the pilot. In some cases, venting could be the primary issue. Therefore, the technician will ensure that the gas is actually turned on. The specialist may also verify that water is not running off into or flooding the structure of the heater. And finally, debris has a tendency to clog heaters as well, and the technician will assess for this too.

In some cases, the heater may not reach a temperature that is suitable. If this is the case, then the technician may notice that the thermostat is too low-in which case he or she would set it accordingly.Sometimes, the heater is simply too small for the pool, causing the output of heat to be greater than the input. This leads to what is referred to as heat loss. In this case, your technician may mention the possibility of having a solar pool cover installed in order to reduce heat loss, and use the solar power only when necessary. Some pools experience the issue of overheating, which is strongly associated with the high limit switch. The high limit switch is designed to prevent such occurrences. However, in spite of this, if the high limit switch is not functioning properly, the pool may begin to overheat.

But what if the heater simply turns on and off before it ever reaches the temperature that you are looking for? If this is the case, then your heater may not be able to flow properly. This occurs when there is a buildup of debris, in which case the technician would simply clean the filter on your behalf. In other cases, this is caused when water connections are reversed, or when a pressure switch has not been properly adjusted. And finally, a closed valve would also be responsible for this.